MAERT-M Series Heatless Adsorption Dryer (Modular)

MAERT M Series Heatless Adsorption Dryer (Modular)

MAERT-M — Модульный адсорбционный осушитель сжатого воздуха без нагрева | 1,6–35 Нм³/мин

Описание продукта

Модульный адсорбционный осушитель сжатого воздуха MAERT-M без нагрева работает по принципу адсорбции с переключением давления. Адсорбент удаляет влагу из сжатого воздуха, обеспечивая непрерывную подачу сухого воздуха без внешнего источника нагрева.

Во время работы одна колонна осушает воздух под давлением, а вторая регенерируется после сброса давления с использованием части уже осушенного сжатого воздуха. Колонны автоматически чередуют рабочие циклы. Диапазон производительности серии: 1,6–35 Нм³/мин.

Основные преимущества

  • Безнагревная адсорбция: регенерация адсорбента без внешнего источника тепла.
  • Компактная модульная конструкция: экономит место и упрощает размещение оборудования.
  • Стабильная точка росы: от −20 до −40 °C под давлением для надёжного удаления влаги.
  • Автоматическое переключение двух колонн: обеспечивает непрерывную подачу осушенного сжатого воздуха.
  • Микропроцессорное управление: автоматизация рабочих циклов и удобство эксплуатации.
  • Промышленное применение: подходит для систем, которым необходим сухой и стабильный сжатый воздух.

Стандартные условия эксплуатации

  • Давление воздуха на входе: 0,45–1,0 МПа (номинальное 0,7 МПа).
  • Температура воздуха на входе: менее 45 °C (номинальная 38 °C, насыщенный воздух).
  • Содержание масла на входе: не более 5 ppm.
  • Точка росы под давлением: от −20 до −40 °C.
  • Температура окружающей среды: менее 40 °C.
  • Расход воздуха на регенерацию: приблизительно 14,5%.

Технические характеристики

Послепродажное обслуживание

MAERT оказывает техническую поддержку по вопросам эксплуатации систем подготовки сжатого воздуха.

  • Дистанционные консультации: техническая помощь онлайн и по видеосвязи.
  • Удалённый мониторинг: при наличии соответствующей функции оборудования.
  • Техническое обслуживание: рекомендации по профилактике и диагностике неисправностей.
  • Поддержка производителя: привлечение специалистов производственного партнёра при необходимости.
  • Запасные части: помощь с подбором подходящих оригинальных компонентов.

Для подбора осушителя сообщите необходимую производительность, давление и условия эксплуатации.

Запросить коммерческое предложение →

Product Introduction

The MAERT M Series Heatless Adsorption Dryer (Modular) is a compact compressed air dryer designed around the pressure swing adsorption principle. It uses desiccant to remove moisture from compressed air and provides continuous dry air without an external heat source.

During operation, one drying tower works under pressure while the other tower is depressurized and regenerated by a portion of the dried compressed air. The two towers automatically switch cycles to provide stable and continuous compressed air drying for industrial applications.

Key Features

1. Heatless Pressure Swing Adsorption — Uses pressure swing adsorption and desiccant regeneration without an external heating source.

2. Modular Compact Design — A compact modular structure saves installation space and is suitable for a wide range of compressed air systems.

3. Stable Pressure Dew Point — Provides a pressure dew point of -20°C to -40°C for reliable moisture control.

4. Automatic Twin-Tower Operation — The adsorption and regeneration towers switch automatically to maintain continuous dry air supply.

5. Microcomputer Control — Intelligent control simplifies operation and supports stable automatic cycling.

6. Wide Application Range — Suitable for industrial compressed air systems where reliable and dry compressed air is required.

Standard Operating Conditions

  • Inlet Pressure: 0.45–1.0 MPa (rated 0.7 MPa)
  • Inlet Temperature: <45°C (rated 38°C, saturated)
  • Inlet Oil Content: ≤5 ppm
  • Pressure Dew Point: -20°C to -40°C
  • Ambient Temperature: <40°C
  • Regeneration Air Consumption: approximately 14.5%

Technical Specifications

Model Air Flow
(Nm³/min)
Inlet Temp.
(°C)
Working Pressure
(bar)
Pressure Dew Point
(°C)
Purge Air
(%)
Pressure Drop
(MPa)
Power Supply
(V/Hz)
Power
(W)
Control Dimensions
(L×W×H, mm)
Air Connection Weight
(kg)
HDM016 1.6 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 325×450×790 G1″ 41.5
HDM026 2.6 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 325×450×1065 G1″ 54
HDM038 3.8 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 325×450×1320 G1″ 70
HDM070 7 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×650×1600 G2″ 105
HDM110 11 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×920×1600 G2″ 150
HDM140 14 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×920×1600 G2 1/2″ 180
HDM180 18 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×1085×1600 G2 1/2″ 210
HDM210 21 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×1260×1600 G2 1/2″ 260
HDM250 25 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 445×1420×1600 G2 1/2″ 290
HDM350 35 ≤45 4.5–10 -20 to -40 ≈14.5 ≤0.021 220V / 50–60Hz ≤100 Microcomputer 1100×890×1560 G2 1/2″ 680

Note: Product specifications may be optimized or changed without prior notice. Non-standard voltages and special configurations can be customized. Please contact MAERT for confirmation.

After-Sales Support

Reliable Support for Your Compressed Air System

MAERT provides professional technical support to help customers maintain reliable operation of their compressed air systems.

Remote Technical Support — Technical assistance through online communication and video support.

IoT Remote Monitoring — Remote monitoring support for equipment operation and system status.

Maintenance Guidance — Professional guidance for routine maintenance and troubleshooting.

Factory Technical Support — Technical support from our manufacturing partner when required.

Spare Parts Support — Support for original spare parts and maintenance components.

Need the MAERT M Series Dryer?

Contact the MAERT team for the right compressed air drying solution based on your required air flow, pressure and application.

Request a Quote →